How-To #11 Install AITS chip |
|
For those of you that have bought and need to install thier chocolate chip into thier car. |
|
| 1. Unplug your intake air sensor. |
 |
| 2. if a stock intake, leave sensor in intake. |
|
| 3.
if installing aftermarket intake, dont worry about drilling a hole for the sensor, simply plug the "chocolate chip" into the sensor connector. |
|
| 4.
installation of chip is easy, simply plug into the connector.
|
|
| 5. plug the chip into the sensor connector |  |
| 6. Drive for 30 minutes to an hour, or reset the ECU. | |
Please note this is just a baseline guide, you should in no way attempt you modify your car if you do not know any baseline electronics or use of electrical materials such as a soldering gun, electrical tape, wires, or tools. all information should not be assumed to be 100% perfectly correct. |
|
